Colorado Springs Detached Garage Site Plan for Permit: Proposed Footprint, Driveway Access and Existing Buildings
Planning a Detached Garage in Colorado Springs?
Prepare a clear property layout showing your proposed garage, driveway access and existing buildings. Gather your property records and local review instructions before ordering.
A detached garage needs a suitable building location and a practical route for vehicles. Before construction, your drawings should explain where the garage will sit, how the driveway reaches its doors and what already exists around the proposed work.
A Colorado Springs detached garage site plan for permit should show the proposed footprint within the complete property layout. The Pikes Peak Regional Building Department, or PPRBD, requires site or plot plan review for accessory structures, including structures that qualify for a building permit exemption.[1]
Confirm the requirements for your property before ordering. A Colorado Springs mailing address does not necessarily establish that the property is within City limits.

Start With the Building and Zoning Requirements
Ask PPRBD about the building permit requirements and contact the zoning authority responsible for your property about placement.
The PPRBD detached accessory structure handout identifies a building permit exemption for qualifying one-story detached accessory structures of no more than 200 square feet supported directly on grade. It notes that floodplain permits may still be required.[1]
Do not assume that a small footprint eliminates every review. Describe the garage’s dimensions, height, construction method and intended use, and confirm the applicable process.
For properties within Colorado Springs, the City’s accessory structure guidance identifies additional review considerations for Hillside, Streamside and Historic Preservation overlay districts.[2]
Show the Proposed Garage Footprint
The footprint identifies the garage’s position and size when viewed from above. Label the building as proposed and provide its exterior length and width.
Keep the main wall outline separate from roof overhangs, steps and surrounding paving. Those features may extend beyond the walls.
Send the drafter:
- Exterior wall dimensions.
- Roof overhang information.
- Garage door locations and widths.
- Side entrances, steps or landings.
- Proposed driveway apron dimensions.
Use the latest contractor or manufacturer drawings. If the building size changes, update the affected placement and access information before submission.
Explain the Driveway Access
Show how vehicles will travel from the street or alley to the garage doors. Include the driveway route and the apron immediately in front of the building.
Provide known widths and identify changes in direction. Show nearby fences, retaining walls, steps and buildings that may affect access.
The image above illustrates a side driveway serving a rear garage. Your site may need a different arrangement, particularly where slopes or existing improvements restrict the available space.
Ask the reviewing authority whether a new entrance, widened driveway or work near the public right-of-way requires separate approval. Explain whether the access route is existing, being modified or entirely proposed.
Include Existing Buildings and Improvements
Show the house, existing garages, sheds and other relevant structures. Include nearby decks, patios, walkways and paved areas where they help explain the project.
PPRBD’s plot plan checklist calls for the address, legal description, property lines and dimensions, yards, and existing and proposed site improvements.[1]
Label each feature clearly:
- Existing to remain: Buildings and improvements staying in place.
- Proposed: New construction or paving.
- To be removed: Existing work scheduled for demolition.
If you are replacing a garage, distinguish its existing footprint from the proposed replacement. Identify changes in size, location and door orientation.
Confirm Property Lines and Placement
Provide an existing survey or reliable property records when available. Include all sheets and notes, and identify improvements missing from older documents.
Show proposed distances to relevant boundaries and nearby buildings. State whether measurements are to exterior walls, roof projections or another reference point.
Do not assume a fence establishes the legal boundary. If the location is uncertain, ask a licensed land surveyor what verification is needed.
Confirm the applicable setbacks, height limits and other development standards with the zoning authority. Avoid copying requirements from another lot or applying rules for a different jurisdiction.
Check Hillside Conditions Before Finalizing the Layout
A hillside garage proposal may need more information than a simple overhead layout.
Colorado Springs states that a Hillside Site Plan is required at the building permit stage for new detached structures within the HS-O Hillside Overlay.[3]
If that applies to your property, confirm the required scope before ordering. The City’s Hillside Plan checklist includes grading information and finished floor elevations for the house and garage.[4]
Flag slopes, retaining walls and planned excavation early. Ask whether additional surveying, grading design or engineering is needed to explain the proposal.
Know What the Site Plan Covers
The site plan communicates where the garage and related improvements will be located. The construction drawings explain how the building will be built.
PPRBD’s accessory structure handout addresses foundation plans, framing plans, elevations and sections in addition to the plot plan. It also identifies professional design requirements for non-conventional construction.[1]
USA Site Plans provides unsigned drafting plans. Confirm separately who will prepare any required structural design, soils information, surveys or professionally certified documents.
What to Send Before Ordering
| Item | Information to Provide |
|---|---|
| Property identification | Full address, available parcel information and confirmed reviewing jurisdiction. |
| Reference records | Survey, previous plans and relevant recorded documents. |
| Garage design | Exterior dimensions, height, overhangs and door locations. |
| Proposed placement | A marked-up sketch and known distances to boundaries and structures. |
| Driveway access | Access route, apron dimensions and proposed paving changes. |
| Site conditions | Photos showing existing buildings, slopes, retaining walls and nearby improvements. |
| Review instructions | PPRBD and zoning requirements, overlay information and reviewer comments. |
Review the Complete Layout Before Submission
Compare the site plan with the garage construction drawings. Check that dimensions, door orientation, driveway connections and existing structures agree across the documents.
If the design changes, update the affected layout information before submitting it. Keep the latest version clearly identified for the contractor and reviewing agencies.
Use our site plan checklist for permit approval and Colorado Springs site plan guide covering slopes and drainage to help organize your information.
Ready to Prepare Your Colorado Springs Garage Site Plan?
Gather your property records, garage dimensions, driveway layout and local instructions so the drawing scope can be matched to your project.
USA Site Plans