Grand Rapids Shed Permit Site Plan | USA Site Plans

Grand Rapids Shed Permit Site Plan: Shed Placement, Dimensions and Existing Structures

Getting ready to install a shed in Grand Rapids?

Get a clear site drawing showing your proposed shed, placement measurements and existing buildings.

Order Your Grand Rapids Shed Site Plan

Unsigned site drawings. Confirm the City’s document requirements for your project before ordering.

Before scheduling shed delivery or preparing a foundation, make sure the proposed location works with the buildings already on your property. A Grand Rapids shed permit site plan should show the shed’s footprint, its distance from property lines and its relationship to the house and garage.

The existing layout matters. A backyard with a detached garage may have different options from a lot with only a house. Getting everything onto one drawing helps you explain the project and spot placement questions before committing to a shed size.

Grand Rapids shed permit site plan illustration showing proposed shed placement, dimensions, property boundaries and existing house, garage and deck
Conceptual backyard layout illustrating shed dimensions, placement measurements and existing structures. This image is not a survey or an approved permit drawing.

Which permit do you need for a Grand Rapids shed?

The City’s current accessory structure permit page directs projects smaller than 200 square feet to a Planning Residential Accessory Structure Permit. For structures of 200 square feet or more, it directs applicants to the residential building permit application. [1]

A small shed should not be treated as automatically permit-free. Confirm the correct application before installation, and make sure your address is within the City of Grand Rapids rather than a neighboring municipality.

Describe the shed’s intended use, dimensions and any planned electrical work. A storage shed and a building intended for occupancy should not be described as the same project.

What should the site plan show?

The City’s accessory structure application requires a site plan identifying existing and proposed buildings, lot lines and driveways. Its permit page also calls for the structure’s dimensions and distances from other structures and lot lines. [2] [1]

For a clear drafting request, organize the following:

  • Property outline: lot boundaries and dimensions supported by your property records.
  • Proposed shed: width, length and a clearly labeled footprint.
  • Placement: distances to the nearest side and rear property lines.
  • Building separation: distances to the house and nearby accessory buildings.
  • Existing features: garage, other sheds, decks, driveway and relevant site obstructions.
  • Changes: structures being removed and any proposed paving or access changes.
  • Drawing references: address, scale, north arrow and an existing-versus-proposed legend.

If an old shed is being replaced, show the removal separately. The plan should make it clear whether the new shed is an additional structure or a replacement.

Check the shed location before choosing the final size

Section 5.2.08 of the Grand Rapids Zoning Ordinance establishes placement rules for detached accessory structures. It includes six feet of separation from the main building and three feet from a side lot line or another accessory structure, excluding decks and patios from those separation provisions. Structures less than 60 feet from the front lot line must also respect the required front and side yard setbacks on interior lots. [3]

These provisions are not a complete placement approval for your shed. Ask planning staff to confirm the applicable rear-yard, corner-lot and other requirements for your location.

On the drawing, label the proposed distances rather than simply writing “meets setbacks.” A reviewer needs to understand the actual location. For help gathering the background information, see our guide to finding property setback lines before building.

Already have a detached garage? Include it on the plan

The zoning code generally permits one detached and one attached accessory structure for single-family and two-family dwellings. It separately allows consideration of one additional rear-yard storage or enclosed play structure of 120 square feet or less and up to 14 feet high, with at least three feet from any lot line. Confirm whether your shed qualifies for that provision. [3]

This is why the drawing should include the existing garage and other outbuildings. Showing only the proposed shed leaves out information that may affect the review.

The City’s zoning information attachment asks for the new accessory structure’s dimensions, area, height and exterior materials, along with information about existing accessory structures. Gather that information before submitting your project. [4]

Measurements to send with your drawing request

Start with the shed manufacturer’s specifications. Identify whether the listed dimensions describe the walls, foundation or overall roof footprint.

  • Shed width and length: provide the selected model’s dimensions.
  • Roof projections: identify overhangs separately so they are not confused with wall dimensions.
  • Property line distances: mark the intended location relative to nearby boundaries.
  • Existing building dimensions: provide available measurements for the house, garage and other sheds.
  • Door orientation: show which side faces the access path or yard.

A marked sketch and photos can help explain the proposal. Keep uncertain measurements clearly identified rather than treating estimates as verified facts.

Provide a survey or other supporting property records

The City’s accessory structure placement guide says the overhead site plan should show property lines, existing buildings, driveways, streets, alleys and the proposed structure, and should be based on a property survey. [5]

Attach an available survey when ordering. If you do not know where a boundary is, ask the City what documentation is needed and arrange a licensed survey when necessary. A fence or aerial image does not establish a legal property line.

USA Site Plans prepares unsigned drawings. The service does not perform a land survey or provide stamped architectural or engineering plans.

A site plan is one part of the application

Grand Rapids also lists elevations showing building height and exterior materials, plus foundation details where applicable, among the required project plans. An overhead site drawing does not replace those construction documents. [1]

Ask the shed supplier or contractor for the supporting product and construction information. If the property is in a historic district, the City’s placement guide identifies historic preservation approval as an additional consideration. [5]

How to order your Grand Rapids shed site plan

Once you have confirmed that an unsigned drawing fits the requested scope, enter your property address on the USA Site Plans order form. Attach supporting records and explain the proposed shed size, location and any removals.

In the comments, specify “Grand Rapids shed permit site plan” and identify the house, garage and other structures that will remain. Include any written City requirements or reviewer comments.

The Basic Site Plan is currently listed at $99, with PDF output included and an option to attach files. [6]

Questions homeowners ask before ordering

Can I add a shed if I already have a garage?

Have planning staff confirm the applicable accessory structure allowance before choosing a shed. Include the existing garage and other outbuildings on the drawing so the complete layout can be reviewed.

Should I choose the shed before requesting the drawing?

Choose the footprint and preferred location first. Changing the shed size afterward can change the measured distances and require a drawing update.

Will the site plan guarantee approval?

No. Approval depends on the proposed work and complete application. Confirm document requirements before ordering and address City comments before installation.

Ready to organize your shed permit drawing?

Send your shed dimensions, preferred placement and available property records to USA Site Plans.

Order Your Grand Rapids Shed Site Plan

Unsigned site drawings. Surveys, stamped plans and shed construction documents are separate services.

Sources

  1. City of Grand Rapids: Apply for an Accessory Structure Permit.
  2. City of Grand Rapids: Accessory Structure Permit Application.
  3. Grand Rapids Zoning Ordinance: Section 5.2.08, Accessory Structures.
  4. City of Grand Rapids: Residential Zoning Information Attachment.
  5. City of Grand Rapids: Accessory Structure Placement Guide.
  6. USA Site Plans: Basic Site Plan order form.

Sources checked October 4, 2026. Follow the current City application instructions and zoning ordinance where older forms or handouts differ. Confirm requirements for your specific property before construction.